barriers / 阅读 / 详情

能帮我翻译几个句子吗??谢谢!

2023-07-11 08:17:38
TAG: 翻译 谢谢
共3条回复
苏州马小云

A bottle opener is mainly composed of three parts, transmission device, a lifting platform and mechanical opener. Transmission device comprises a transmission made by gear transmission belt and slider. The lifting platform is two with the frequency of 9V motor, the gear rotation into linear motion through the upper and lower worm is connected, so as to realize the lifting platform. In order to achieve the two motors with the same frequency to work so that the smooth lifting platform, two motor series. Mechanical screwdriver is the use of motor driven gear to rotate, and then through the connection of the worm, gear rotation into linear motion, and then through the screw rod connecting the driver to complete bottle action.

wpBeta

Rev. Bottle opener is mainly composed of three parts -- -- -- -- -- delivery mechanism, lifting platforms, and mechanical opener. Conveyor belt made of transmitting device including the use of gearing and the sliding block. Lift platform is to use two 9 v motor with frequency, through the worm gear connection will turn into a rectilinear motion from top to bottom, so as to realize the lifting platform. In order to achieve the two motor with a higher work frequency so that the smooth lifting platform, the two motors together. Machinery screwdriver is the use of motor driven gear rotation, and then through the worm, gear turning into linear motion, again through the screw connection to finish bottle opener

max笔记

貌似都是电脑软件翻译的啊.

相关推荐

worm gear是什么意思

  worm gear英 [wu0259:m ɡiu0259] 美 [wu025am ɡu026ar]  n.蜗轮;  [网络]蜗轮传动装置; 蜗齿; 螺旋齿轮;  [例句]Reconstruct of the plane-generated double enveloping hourglass worm gear pair  平面二次包络环面蜗轮副的实体重构
2023-07-11 03:44:381

蜗杆与蜗轮英文怎么写

翻译如下:蜗杆与蜗轮Worm and worm gear例句:圆柱蜗杆与蜗轮的加工测量Processing and Measuring of Cylindrical Worm and Worm Gear
2023-07-11 03:44:491

阀门:CL150-DN200-RF-FB-TRUB-SE-FIRE-SAFE-ASTM-A216-WCB-TRIM304+RTFE-WORM GEAR,请问整句是什么意思

TRUB: Trunnion Ball固定球SE(或SEY): Side Entry侧装FIRE-SAFE: 防火ASTM A216 WCB: 碳钢铸件(阀体材质)TRIM(阀芯)304-RTFE:304不锈钢+RTFE(加强的特氟龙)
2023-07-11 03:44:582

高分+追加 几组专业词的英文翻译

Metal Gear Plastic gear Worm Umbrella Tooth Bevel Gear Gear Box MIM powder Powder metallurgy PM Hardware Precision plastic parts Gear Box Copper turbine, worm, bronze turbine Bronze worm gear, bronze worm Damper Gear Gear reducer Precision worm shaft Pair Racks, ramps rack, plastic rack Damper Gear Analog-to-digital worm Mold Parachute gear, bevel gear Double-gear, transmission gear Hobbing Long worm Planetary gear box Reducer LED lampholders, cnc aluminum parts 亲看看哦~希望有帮助... ^^
2023-07-11 03:45:242

蜗轮蜗杆用英文Worm wheel,worm可以吗?用什么更准确一些?

蜗轮用Worm gear
2023-07-11 03:45:344

蜗轮外圆怎么编程的?

蜗轮是一种机械传动件,通常由蜗杆和蜗轮组成。蜗轮外圆编程需要考虑其轮廓形状和加工工艺,一般可以采用数控加工技术进行编程。以下是一些可能涉及到的编程步骤:1.确定蜗轮的轮廓形状和尺寸:可以通过图纸或三维模型获取蜗轮的外形和尺寸信息,根据这些信息来确定编程参数。2.选择合适的数控加工机床:蜗轮外圆通常采用数控车床或数控磨床进行加工。选择合适的数控加工机床可以确保加工精度和效率。3.编写数控程序:根据蜗轮的轮廓形状和加工工艺,编写数控程序。数控程序需要包括加工路径、加工速度、切削深度等加工参数。4.进行加工:在数控加工机床上加载数控程序,进行蜗轮外圆的加工。需要注意的是,蜗轮的加工需要较高的精度和技术要求,通常需要经过多道工序进行加工和检验。因此,在进行加工之前,需要充分了解蜗轮的加工要求和相关技术规范。以下是一些可能用到的数控加工程序指令(G代码):G00:快速移动G01:直线插补G02/G03:圆弧插补(顺时针/逆时针)G40/G41/G42:刀具半径补偿(取消/左偏/右偏)G90/G91:绝对/相对距离指令M03/M04:主轴正/反转M08/M09:冷却液开/关这些指令需要结合具体加工情况进行调整和编写。为了确保程序的正确性和安全性,建议在编写程序前先进行加工路径模拟和机床仿真,并在加工过程中进行实时监控和调整。
2023-07-11 03:45:412

请问齿轮中,除了直齿轮,斜齿轮和人字齿轮外,还有哪些种类的齿轮呢?

齿轮按齿圈上的轮齿分布形式可分为,直齿,斜齿,人字齿,锥齿(常见的)。按轮体的结构可分为盘类齿,套类齿,轴类齿,条类齿等。
2023-07-11 03:46:032

几个机械方面的词请高手帮忙

1。编码器齿轮2。心轴键沟3。桌脚4。B轴罗纹齿轮5。泵组
2023-07-11 03:46:112

求英语达人帮忙翻译一篇机械类英语文章,急!谢谢(下半部分)

Gears are often through-hardened by water or oil quenching in order to increase their resistance to wear. 齿轮通常都要经过在油介质或者水介质中的整体淬火,以达到增加耐磨性的目的。If a low degree of hardness is satisfactory, through-hardening is probably the most desirable heat treatment process to be used because of its inexpensiveness. 如果对强度的要求较低,整体淬火可能是最适当的热处理方法,因为它的花费不高。Case hardening is used for gear that require a hard surface and for which good accuracy is not necessary. 局部淬火使用在那些要求表面硬度较高的齿轮上,而且很难精确的达到。The case hardening process results in gears that have much harder surfaces than cores. 局部淬火处理的齿轮具有比心部组织硬度高的表面硬度。The advantage of case hardening is that, while the surface becomes hard and wear resistant, the toughness associated with the core remains.局部淬火的优点是,表面具有高硬度和高耐磨性的同时,心部组织仍然保留着较高的韧性。Carburizing, cyaniding, and induction hardening are some of the processes commonly used to produce the case hardening effect. 碳化、氰化、感应淬火是局部淬火中经常使用的处理方法。If great accuracy is required, the gear must be ground. 如果对齿轮有精度要求,齿轮就必须经过磨削。For problems in which corrosion resistant surfaces are desirable, nitriding is the process most often used. However, nitriding is a relatively expensive process and is used only if other processes do not produce satisfactory results. 对于表面有抗腐蚀性要求的齿轮,渗氮是最常用的方法。然而,渗氮是一种相对较昂贵的热处理方法,并且通常只在其它热处理方法无法满足要求时才会使用。Flame hardening and induction hardening are the methods usually used to harden larger gears. 火焰淬火和感应淬火是经常在大型齿轮上使用的热处理方法。To sum up this discussion of specially heat treated steels, the designer should make use of carbon or alloy steels without special heat treatment if the relatively low surface hardening of these untreated materials is satisfactory. 作为对特殊热处理钢材讨论的总结,设计师应当在未经热处理的低表面硬度材料能够满足使用要求时,使用不经过特殊热处理的碳钢或合金钢。As the hardness requirement increase, the heat treated steels should be considered, with the least expensive steel that satisfies the strength and wear requirements being chosen. 随着硬度要求的增加,应当考虑选择能够达到强度、耐磨性要求的最便宜的热处理钢材。Nonferrous Metals Gears have been manufactured of nonmetallic materials for many years. 用非金属材料来制造齿轮已经有很长时间。Rawhide, nylon, various type of plastics, and so on, have been used. The advantages obtained by using these materials are quiet operation, internal lubrication, dampening of shock and vibration, and manufacturing economy. 生牛皮、尼龙、各种塑料、以及其它材料都得到应用。这些材料的优点有:静音操作、自润滑、减振性好、以及加工制造经济性好。Their primary disadvantages are lower load carrying capacity and low heat conductivity, which results in heat distortion of the teeth and many result in a serious weakening of the gear teeth. 它们的主要缺点是承载能力低和热传导性差,这些引起了轮齿的热变形和多种轮齿能力的降低。Recently thermoplastic resins, with glass-fiber reinforcement and a lubricant as additives, have been used as gear materials. 最近,一种由玻璃纤维加固、并且带有自润滑剂的热塑性塑料,已经被用来做齿轮材料。The composite material has resulted in greater load carrying capacity, a reduced thermal expansion, greater wear resistance and fatigue endurance.合成材料具有更好的承载能力,更低的热膨胀系数,更好的耐磨性和更好的抗疲劳性能。问题补充:Nonferrous Metals Nonmetallic Materials 麻烦翻译达人了!补充这句是有点问题,Nonferrous Metals是有色金属。Nonmetallic Materials是非金属材料。用有色金属制非金属材料齿轮显然不对,我把那句翻成用非金属材料制非金属齿轮了。你对照下原文再。问题补充:还漏了一段:Copper, zinc, aluminum, and titanium and titanium are materials used to obtain alloys that are useful gear materials. 铜、锌、铝和钛是经常使用在齿轮材料中的合金金属。The copper alloys, known as bronzes, are perhaps the most widely used. 铜合金,比如青铜,可能是应用最广泛的合金。They are useful in problems where corrosion resistance is important and also where large sliding velocities exist. 它们用在要求有较高耐腐蚀性的情况,以及有较大滑动速度存在时。Because of their ability to reduce friction and wear, they are usually used as the material for making the worm wheel in a worm gear set. 因为具有减摩性和耐磨性的性能,它们通常用来制作涡轮减速器中的涡轮。Aluminum and zinc alloys are used to manufacture gears by the diecasting process.铝和锌的合金用来在模铸法中制造齿轮。
2023-07-11 03:46:191

常用齿轮传动形式有那些?

齿轮传动的类型很多,按照不同的分类方法可分为不同的类型。1、按传动比根据一对齿轮传动的传动比是否恒定来分,可分为定传动比和变传动比齿轮传动。变传动比齿轮传动机构中齿轮一般是非圆形的,所以又称为非圆齿轮传动,它主要用于一些具有特殊要求的机械中。而定传动比齿轮传动机构中的齿轮都是圆形的,所以又称为圆形齿轮传动。定传动比齿轮传动的类型很多,根据其主、从动轮回转轴线是否平行,又可将它分为两类,即平面齿轮传动和空间齿轮传动。2、按齿廓形状按齿廓曲线的形状不同,可分为渐开线齿轮传动、摆线齿轮传动、圆弧齿轮传动和抛物线齿轮传动等。其中渐开线齿轮传动应用最为广泛。3、按工作条件按齿轮传动的工作条件不同,可分为闭式齿轮传动、开式齿轮传动和半开式齿轮传动。开式齿轮传动中轮齿外露,灰尘易于落在齿面;闭式齿轮传动中轮齿封闭在箱体内,可保证良好的工作条件,应用广泛;半开式齿轮传动比开式齿轮传动工作条件要好,大齿轮部分浸入抽池内并有简单的防护罩,但仍有外物侵入。4、按齿面硬度根据齿面硬度不同分为软齿面齿轮传动和硬齿面齿轮传动。当两轮(或其中有一轮)齿面硬度≤350HBW时,称为软齿面传动;当两轮的齿面硬度均>350HBW时,称为硬齿面传动。软齿面齿轮传动常用于对精度要求不太高的一般中、低速齿轮传动,硬齿面齿轮传动常用于要求承载能力强、结构紧凑的齿轮传动。齿轮传动的类型虽然很多,但渐开线直齿圆柱齿轮传动是其中最简单、最基本的类型。
2023-07-11 03:46:303

蜗轮叫名字什么意思网络用语

两轴在空中成直交时常用的齿轮。齿轮速比差可达一比一零零,但效率反而不佳。因具有不倒转的特性,故常用于起重机的升降。
2023-07-11 03:46:492

求机械专业英语翻译

主要是由齿轮类型确定处置之轴;此外,某些类型的变量比其他人更适合大型速度的变化。这意味着如果一个特定的性格在轴上是必须的,该类型的齿轮将或多或少是固定的。另一方面,如果一个所需要的速度转变需要某一类型、轴的位置也会被修正。直齿圆柱齿轮、斜齿轮。一个齿轮有蛀牙的要素,它笔直平行轴是众所周知的齿轮。对一个刺激可以用来连接平行轴而已。 直齿圆柱齿轮、斜齿轮。一个齿轮有蛀牙的要素,它笔直平行轴是众所周知的齿轮。对一个刺激可以用来连接平行轴而已。 如果一个渐开线直齿圆柱齿轮是由橡胶和扭曲的统一,使结束关于轴旋转,相对于彼此的元素,最初的牙齿笔直平行轴,将成为一圈。在齿轮的效果将会变成一个螺旋齿轮。蠕虫和伞齿轮。为了实现线接触,提高承载能力的交叉轴斜齿轮,齿轮的曲线,就可以将部分地绕齿轮,以多多少少相同的方式包围着一个螺丝螺母。其结果将是一个圆柱蜗杆和齿轮。蠕虫是也出现了形体的承载能力,进一步增强了。涡轮齿轮提供最简单的意味着获得大的比例,在一个单一的一对。他们通常是更有效率的比parallel-shaft齿轮,然而,由于额外的一个滑动运动沿牙齿。
2023-07-11 03:46:593

那个不好意思、可以麻烦你在帮我翻译一次吗?非常感谢!

这个翻译还是找翻译公司吧,您可以了解一下北京百译全翻译公司,为各行各业提供优质翻译服务,配备多语种多领域,资历高,经验丰富的专业翻译人员,保证翻译质量。并且收费合理,性价比高,为您提供最满意的翻译服务。
2023-07-11 03:47:072

求人帮我做下英文翻译

The electric device opens 1.1 electric valve devices valves from electric motor drive, by the fact that the organization reducing the speed exports the appropriate revolution regulation and rotation rate driving a valve/ being closed down. In being unlike the industry applying, the electric device of valve is also called "valve actuating mechanism or the "electric implementation implement sometimes". Be allotted the electric device turning round (straighten a route or distance of travel) for the electric device and "many circles turning round (angle route or distance of travel)"90 degree according to the type handling a valve".1.2 valve hand gear valves hand gear is also called "valve reduction gear sometimes ", is adopt the organization, be used for manpower reducing the speed such as worm worm gear , epicyclic gear to handle a valve open/ be closed down. Also can become electric actuating mechanism usage with 903 electric device combination. Be allotted the hand gear turning round (angle route or distance of travel) for "90 degree and be enclosed the hand gear turning round (straighten a route or distance of travel)"much according to the type handling a valve".1.3 electric valves are used for electric device of long-range under the control of valve operation such as carrying out the turn off valve open/ or adjusting valve location like electric controller valve controller. The link the centre also being able to wait for the superordination controlling machine and the electric fundamental type device as PLC is controlled is put into use.Keywords: Electric device of valve; Valve hand gear; Electric valve controller.
2023-07-11 03:47:141

论文摘要翻译成英文,求高手人工翻译,千万不要机器翻译出来的,急用!!!谢谢!!!

论文翻译:Worm drive mechanism has a large transmission ratio, small number of parts, the overall structure is very compact, resulting in the transmission process of the impact load is small, smooth transmission, low noise, also has a self-locking, but the disadvantage is greater friction and wear, worm high manufacturing costs. In helical gears instead composed of cylindrical worm worm helical gear mechanism to overcome this disadvantage can be a good and retain the advantage. In the automotive field, this transmission mechanism widely used, often with plastic instead of metal materials to produce helical gears. Cylindrical Worm Helical Gear coincidence degree size affects the stability of the entire transmission process and the size of the noise. With cylindrical worm and helical gears meshing planar face as the research object, first calculate the actual meshing line length of the projection on the end face, according to face France plane conversion relationship to calculate the actual meshing line length, degree of coincidence derived formula. Build a GUI using MATLAB interface module generates coincidence degree of each parameter is calculated as a function of degree of coincidence images. Drawing France face pressure angle, addendum coefficient, helical gears modification coefficient, lead angle worm, helical gear with a function of degree of coincidence images summarize the five parameters on the coincidence degree of regularity, to facilitate the production process designed with the ideal degree of coincidence of cylindrical worm helical gear transmission mechanism.
2023-07-11 03:47:222

13cr/buna-n,worm gear,api 609在蝶阀中是什么意思

13cr:阀板材料buna-n:丁二烯橡胶(丁腈橡胶),这是密封材料。worm gear 蜗轮传动。api 609是蝶阀的制造标准。
2023-07-11 03:47:401

翻译高手拿分的进了

快点提高悬赏分数。。。
2023-07-11 03:47:483

齿轮都有什莫样的?最好能附上图片

1.平行轴之齿轮(圆柱齿轮)(1)正齿轮(直齿轮)(Spur gear ):齿筋平行于轴心之直线圆筒齿轮。(2)齿条( Rack ):与正齿轮咬合之直线条状齿轮,可以说是齿轮之节距在大小变成无限大时之特殊情形。(3)内齿轮(Internal gear):与正齿轮咬合之直线圆筒内侧齿轮。(4)螺旋齿轮(Helical gear):齿筋成螺旋线(helicoid)之圆筒齿轮。(5)斜齿齿条(Helical rack):与螺旋齿轮咬合之直线状齿轮。(6)双螺旋齿轮(Double helical gear):左右旋齿筋所形成之螺旋齿轮。2.直交轴之齿轮(圆锥齿轮)(1)直齿伞形齿轮(Straight bevel gear):齿筋与节圆锥之母线(直线)一致之伞形齿轮。(2)弯齿伞形齿轮(Spiral bevel gear):齿筋为具有螺旋角之弯曲线的伞形齿轮。(3)零螺旋弯齿伞形齿轮(Zerol bevel gear):螺旋角为零之弯齿伞形齿轮。3.错交轴之齿轮(蜗轮和蜗杆)(1)圆筒蜗轮齿轮(Worm gear):圆筒蜗轮齿轮为蜗杆(Worm)及齿轮(Wheel)之总称。(2)错交螺旋齿轮(screw gear):此为圆筒形螺旋齿轮,利用要错交轴(又称歪斜轴)间传动时称之。(3)其它之特殊齿轮: 面齿轮(Face gear):为能与正齿轮或与螺旋齿轮咬合之圆盘形的面齿轮。 鼓形蜗轮齿轮(Concave worm gear):凹鼓形蜗杆及与此咬合之齿轮的总称。 戟齿轮(Hypoid gear):传达错交轴之圆锥状齿轮。形状类似弯齿伞形齿轮。
2023-07-11 03:47:581

饮料灌装机械的英语专业术语有哪些啊?

  人字齿轮herringbone gear  冗余自由度redundant degree of freedom  柔轮flexspline  柔性冲击flexible impulse; soft shock  柔性制造系统flexible manufacturing system; FMS  柔性自动化flexible automation  润滑油膜lubricant film  润滑装置lubrication device  润滑lubrication  润滑剂lubricant  三角形花键serration spline  三角形螺纹V thread screw  三维凸轮three-dimensional cam  三心定理Kennedy`s theorem  砂轮越程槽grinding wheel groove  砂漏hour-glass  少齿差行星传动planetary drive with small teeth difference  设计方法学design methodology  设计变量design variable  设计约束design constraints  深沟球轴承deep groove ball bearing  生产阻力productive resistance  升程rise  升距lift  实际廓线cam profile  十字滑块联轴器double slider coupling; Oldham‘s coupling  矢量vector  输出功output work  输出构件output link  输出机构output mechanism  输出力矩output torque  输出轴output shaft  输入构件input link  数学模型mathematic model  实际啮合线actual line of action  双滑块机构double-slider mechanism, ellipsograph  双曲柄机构double crank mechanism  双曲面齿轮hyperboloid gear  双头螺柱studs  双万向联轴节constant-velocity (or double) universal joint  双摇杆机构double rocker mechanism  双转块机构Oldham coupling  双列轴承double row bearing  双向推力轴承double-direction thrust bearing  松边slack-side  顺时针clockwise  瞬心instantaneous center  死点dead point  四杆机构four-bar linkage  速度velocity  速度不均匀( 波动) 系数coefficient of speed fluctuation  速度波动speed fluctuation  速度曲线velocity diagram  速度瞬心instantaneous center of velocity  塔轮step pulley  踏板pedal  台钳、虎钳vice  太阳轮sun gear  弹性滑动elasticity sliding motion  弹性联轴器elastic coupling flexible coupling  弹性套柱销联轴器rubber-cushioned sleeve bearing coupling  套筒sleeve  梯形螺纹acme thread form  特殊运动链special kinematic chain  特性characteristics  替代机构equivalent mechanism  调节modulation, regulation  调心滚子轴承self-aligning roller bearing  调心球轴承self-aligning ball bearing  调心轴承self-aligning bearing  调速speed governing  调速电动机adjustable speed motors  调速系统speed control system  调压调速variable voltage control  调速器regulator, governor  铁磁流体密封ferrofluid seal  停车阶段stopping phase  停歇dwell  同步带synchronous belt  同步带传动synchronous belt drive  凸的,凸面体convex  凸轮cam  凸轮倒置机构inverse cam mechanism  凸轮机构cam , cam mechanism  凸轮廓线cam profile  凸轮廓线绘制layout of cam profile  凸轮理论廓线pitch curve  凸缘联轴器flange coupling  图册、图谱atlas  图解法graphical method  推程rise  推力球轴承thrust ball bearing  推力轴承thrust bearing  退刀槽tool withdrawal groove  退火anneal  陀螺仪gyroscope  V 带V belt  外力external force  外圈outer ring  外形尺寸boundary dimension  万向联轴器Hooks coupling universal coupling  外齿轮external gear  弯曲应力beading stress  弯矩bending moment  腕部wrist  往复移动reciprocating motion  往复式密封reciprocating seal  网上设计on-net design, OND  微动螺旋机构differential screw mechanism  位移displacement  位移曲线displacement diagram  位姿pose , position and orientation  稳定运转阶段steady motion period  稳健设计robust design  蜗杆worm  蜗杆传动机构worm gearing  蜗杆头数number of threads  蜗杆直径系数diametral quotient  蜗杆蜗轮机构worm and worm gear  蜗杆形凸轮步进机构worm cam interval mechanism  蜗杆旋向hands of worm  蜗轮worm gear  涡圈形盘簧power spring  无级变速装置stepless speed changes devices  无穷大infinite  系杆crank arm, planet carrier  现场平衡field balancing  向心轴承radial bearing  向心力centrifugal force  相对速度relative velocity  相对运动relative motion  相对间隙relative gap  象限quadrant  橡皮泥plasticine  细牙螺纹fine threads  销pin  消耗consumption  小齿轮pinion  小径minor diameter  橡胶弹簧balata spring  修正梯形加速度运动规律modified trapezoidal acceleration motion  修正正弦加速度运动规律modified sine acceleration motion  斜齿圆柱齿轮helical gear  斜键、钩头楔键taper key  泄漏leakage  谐波齿轮harmonic gear  谐波传动harmonic driving  谐波发生器harmonic generator  斜齿轮的当量直齿轮equivalent spur gear of the helical gear  心轴spindle  行程速度变化系数coefficient of travel speed variation  行程速比系数advance-to return-time ratio  行星齿轮装置planetary transmission  行星轮planet gear  行星轮变速装置planetary speed changing devices  行星轮系planetary gear train  形封闭凸轮机构positive-drive (or form-closed) cam mechanism  虚拟现实virtual reality  虚拟现实技术virtual reality technology, VRT  虚拟现实设计virtual reality design, VRD  虚约束redundant (or passive) constraint  许用不平衡量allowable amount of unbalance  许用压力角allowable pressure angle  许用应力allowable stress; permissible stress  悬臂结构cantilever structure  悬臂梁cantilever beam  循环功率流circulating power load  旋转力矩running torque  旋转式密封rotating seal  旋转运动rotary motion  选型type selection  压力pressure  压力中心center of pressure  压缩机compressor  压应力compressive stress  压力角pressure angle
2023-07-11 03:49:151

worm gear是什么意思

  worm gear英 [wu0259:m ɡiu0259] 美 [wu025am ɡu026ar]  n.蜗轮;  [网络]蜗轮传动装置; 蜗齿; 螺旋齿轮;  [例句]Reconstruct of the plane-generated double enveloping hourglass worm gear pair  平面二次包络环面蜗轮副的实体重构
2023-07-11 03:49:401

worm gear是什么意思

  worm gear英 [wu0259:m ɡiu0259] 美 [wu025am ɡu026ar]  n.蜗轮;  [网络]涡轮; 蜗轮传动装置; 蜗轮加工;  [例句]Machine tool Worm gear High-precision Error analysis Error correction;  机床;蜗轮;高精度;误差分析;误差修正;
2023-07-11 03:49:471

worm gear pair是什么意思

蜗轮副希望可以帮到你,望采纳谢谢!!
2023-07-11 03:49:551

常用齿轮传动形式有那些?

(2)齿条( Rack ):与正齿轮咬合之直线条状齿轮,可以说是齿轮之节距在大小变成无限大时之特殊情形。(3)内齿轮(Internal gear):与正齿轮咬合之直线圆筒内侧齿轮。(4)螺旋齿轮(Helical gear):齿筋成螺旋线(helicoid)之圆筒齿轮。(5)斜齿齿条(Helical rack):与螺旋齿轮咬合之直线状齿轮。(6)双螺旋齿轮(Double helical gear):左右旋齿筋所形成之螺旋齿轮。 2.直交轴之齿轮(圆锥齿轮) (1)直齿伞形齿轮(Straight bevel gear):齿筋与节圆锥之母线(直线)一致之伞形齿轮。(2)弯齿伞形齿轮(Spiral bevel gear):齿筋为具有螺旋角之弯曲线的伞形齿轮。(3)零螺旋弯齿伞形齿轮(Zerol bevel gear):螺旋角为零之弯齿伞形齿轮。 3.错交轴之齿轮(蜗轮和蜗杆) (1)圆筒蜗轮齿轮(Worm gear):圆筒蜗轮齿轮为蜗杆(Worm)及齿轮(Wheel)之总称。(2)错交螺旋齿轮(screw gear):此为圆筒形螺旋齿轮,利用要错交轴(又称歪斜轴)间传动时称之。(3)其它之特殊齿轮: 面齿轮(Face gear):为能与正齿轮或与螺旋齿轮咬合之圆盘形的面齿轮。 鼓形蜗轮齿轮(Concave worm gear):凹鼓形蜗杆及与此咬合之齿轮的总称。 戟齿轮(Hypoid gear):传达错交轴之圆锥状齿轮。形状类似弯齿伞形齿轮。
2023-07-11 03:50:051

请问齿轮中,除了直齿轮,斜齿轮和人字齿轮外,还有哪些种类的齿轮呢?

齿轮按齿圈上的轮齿分布形式可分为,直齿,斜齿,人字齿,锥齿(常见的)。按轮体的结构可分为盘类齿,套类齿,轴类齿,条类齿等。
2023-07-11 03:50:272

常用齿轮传动形式有那些?

①圆柱齿轮——平行轴间传动。②圆锥齿轮——两相交轴间传动。③涡轮与蜗杆——两交错轴间传动。
2023-07-11 03:50:362

求英文高手帮我翻译一个文章(汉译英,机械类)

求英文高手帮我翻译一个文章(汉译英,机械类) 悬赏分:10 - 离问题结束还有 14 天 23 小时Mechanics Components Charles W. Beardsley Gears Spur and helical gears. A gear having tooth elements that are straight and parallel to its axis is known as a spur gear. A spur pair can be used to connect parallel shafts only. Parallel shafts, however, can also be connected by gears of another type, and a spur gear can be mated with a gear of a different type. To prevent jamming as a result of thermal expansion, to aid lubrication, and to compensate for unavoidable inaccuracies in manufacture, all power-transmitting gears must have backlash. This means that on the pitch circles of a mating pair, the space width on the pinion must be slightly greater than the tooth thickness on the gear, and vice versa. On instrument gears, backlash can be eliminated by using a gear split down its middle, one half being rot table relative to the other A spring forces the split gear teeth to occupy the full width of the pinion space. Helical gears have certain advantages; for example, when connecting parallel shafts they have a higher load carrying capacity than spur gears with the same tooth numbers and cut with the same cutter. Because of the overlapping action of the teeth, they are smoother in action and can operate at higher pitch-line velocities than spur gears. The pitch-line velocity is the velocity of the pitch circle. Since the teeth are inclined to the axis of rotation, helical gears create an axial thrust. If used singly, this thrust must be absorbed in the shaft bearings. The thrust problem can be overcome by cutting two sets of opposed helical teeth on the same blank. Depending on the method of manufacture, the gear may be of the continuous-tooth herringbone variety or a double-helical gear with a space between the two halves to permit the cutting tool to run out. Double-helical gears are well suited for the efficient transmission of power at high speeds. Helical gears can also be used to connect nonparallel, non-intersecting shafts at any angle to one another. Ninety degrees is the commonest angle at which such gears are used. Worm and bevel gears. In order to achieve line contact and improve the load-carrying capacity of the crossed axis helical gears, the gear can be made to curve partially around the pinion, in somewhat the same way that a nut envelops a screw. The result would be a cylindrical worm and gear. Worm gears provide the simplest means of obtaining large ratios in a single pair. They are usually less efficient than parallel-shaft gears, however, because of an additional sliding movement along the teeth. Because of their similarity, the efficiency 55 of a worm and gear depends on the same factors as the efficiency of a screw. Single-thread worms of large diameter have small lead angles and low efficiencies. Multiple-thread
2023-07-11 03:50:472

翻译,有病句么?

翻译出的结果——附件是我们的新项目的齿轮箱,能请您看看,欢迎您的评论在设计改进,包括:  1。蠕虫和齿轮的材料。  2。齿轮的建筑材料。  3。basic-design数据的蠕虫病毒和齿轮有些别扭唉~
2023-07-11 03:51:063

翻译,这个英语有病句么,怎么改?

The attachment is a gear box of our new project, and we are looking forward to your comments on the products design improvements, including:1.The worm and the gear materials.2.The gear housing materials. 3.The basic-design data of the worm and the gear
2023-07-11 03:51:143

减速器方面的翻译

Abstract: The reducer is a closed shell of the rigid gear drive, worm drive or gear - worm drive components are part of an independent, common in the power machine and work as a reducer between the transmission device; in a few occasions also used for the transmission rate when the device is called the growth rate. Reducer as a result of compact, efficient, accurate and reliable transmission of movement, the use of simple maintenance, and mass production, so in the modern machine measures a wide range of applications. By gear reducer gear reducer series can be divided into single-stage, secondary and tertiary and several multi-stage reducer; by mutual axis configuration in space can be divided into two types of vertical and horizontal reducer; by sketch the characteristics of movement can be divided into the expansion, coaxial and reducer, such as streaming. Gear reducer is characterized by high efficiency, long service life, easy maintenance, which has a wide range of applications. Gear of the subject is a typical application. Keywords: gear reducer transmission of movement
2023-07-11 03:51:231

机械英语翻译 请大侠帮忙

专业的翻译还是不要随便在网上问,应为“在线翻译”的不知道你是否敢用呢?雷音翻译精准翻译您的稿件
2023-07-11 03:51:301

worm gear material:GMP.POM.005 ticona celcom m90 or GMP.POM.003 dupont delrin,100p nc 010 ,什么意思

那是POM塑料原料的代号名称
2023-07-11 03:51:492

variator造句 variatorの例文 "variator"是什麼意思

Home product description plaary variator 首页产品介绍游星减速机 Hydraupc moment converter ; hydraupc moment variator 液压变矩器 Our main products : reducer , gear motor , bevel gear , worm - gear motor , cycloidal reducer and variator 公司主要产品有:齿轮减速机;蜗轮蜗杆减速机;螺旋伞齿轮减速机;摆线针轮减速机及无级变速器。 A kind of mechanical patterned step - less variator with specified range of apppcation has been introduced . the position , working principle of this mechani *** and its designing calculation were expounded 摘要介绍了一种具有一定应用范围的机械式无级变速器。阐述了该机构的组成、工作原理及其设计计算。 We speciapze in manufacturing ud ( l ) series pla cone - disk speed variator , rv series worm gearbox , wj series cast iron worm gearbox , g series hepcal geared motor & other hepcal speed reducers , kg series aluminum worm gearbox , y2 series ( ip54 ) electrical motor , x b jxj series cycloid pin wheel reducer , all kinds of bination and their related parts 专业生产ud ( l )系列行星锥盤无级变速机, rv系列蜗轮蜗杆减速机, wj系列铸铁蜗轮蜗杆减速机, g系列斜齿轮减速机及其它斜齿轮减速机, kg系列铝合金蜗轮蜗杆减速机, y2系列( ip54 )三相异步电机, x b jxj系列摆线针轮减速机,各种组合变速机及各种配件。 The pany passed iso9001 in 2001 : 2000 international quapty management system attestations . now the predominant product has already bee xr series hepcal gear units , xf series parallel shaft hepcal gear units , xk serial hepcal - bevel gear units , xs series hepcal - worm gear units , xt series spiral bevel gear units , xb series high power gear units , xh series high power gear units , nmrv series worm gear units , mb , mbn series plaary friction mechanical speed variator , x , b series cycloid reducer , wb series cycloid micro reducer to wait more than ten serieses , several thousand kinds of specificationses of in general use product 现主导产品已形成xr系列斜轮硬面减速机xf系列平行轴斜轮减速机xk系列斜轮螺旋锥轮减速机xs系列斜轮蜗轮减速机, xt系列螺旋锥轮减速机, xb系列螺旋锥轮-斜轮减速机xh系列平行轴斜轮减速机nmrv系列蜗轮减速机, mb mbn系列行星锥盤无级变速机, x b系列摆线针轮减速机, wb微型摆线针轮减速机等十几个系列数千种规格的通用产品。 It"s difficult to find variator in a sentence. 用 variator 造句挺难的
2023-07-11 03:51:561

hourglass worm中文翻译

The process has an advanced principle . the involute hourglass worm drive can reapze the design machining of gear form and direction , and the internal meshing honing gear has high efficiency . this process has all merits mentioned above , and also has the advantages of quapty stabipty , high productivity for rude and finish machining 该工艺原理先进,它集有利于实现齿形、齿向设计加工的渐开面环面蜗杆传动与高效的内啮合珩齿的优点与一体,对齿轮的粗、精加工都有质量稳定、生产效率高的优点。 On the condition of “ many - head ” and “ *** all drive ratio ” , the plane double enveloping hourglass worm can not settle the problem of undercutting and sharpening simultaneously . it has devoted to a new type hourglass worm _ sphere double enveloping hourglass worm . the coordinate system is estabpshed according to the frock . the meshing equation and the tooth equation of worm and gear have been developed and the distribution of contact pne on gear tooth is *** yzed . to evaluate the meshing quapty , four meshing quapty indexes and five original parameters are put forward . through mass programming puting , the relations beeen meshing quapty and original parameters are derived and depicted by graphs 考虑到平面二次包络环面蜗杆传动在多头小传动比条件下根切与齿顶变尖的矛盾很难同时解决且啮合性能较差,介绍了一种新型环面蜗杆传动? ?球面二次包络环面蜗杆传动.在研究过程中,根据工装建立了坐标系,根据一二包过程的运动关系推得了啮合方程和蜗杆与蜗轮的齿面方程,分析了蜗轮齿面上的接触线分布.为了评价啮合性能,提出了4项性能指标和5项原始参数,通过大量编程计算得到了啮合性能指标与原始参数之间的关系,并以图表直观的表示 With the increasingly extensive apppcation of the planar enveloping hourglass worm gearing , it bees more important to rapid detection and high precision of the manufacture error . the surface of the planar enveloping worm gearing is ppcate , and current domestic and international examination concerning its form generally is recur to the general three dimension measure apparatus or the special measure apparatus according to " the type of assemble " principle designed 由于平面包络环面蜗杆齿面比较复杂,其齿形、齿距、齿厚各不相等,因而关于它的制造误差检测也比较复杂。目前国内外关于其形面的检测一般是借助于通用三坐标测量机或按“装配式”检测原理(即测量状态与加工状态一致的原理)设计专用量仪进行的,一直没有十分成熟的专门产品问世。
2023-07-11 03:52:031

大虾们帮着翻译下啊帮帮忙

蜗杆传动都是单人或双人包络。一个单一的包络传动装置是一个在其中齿轮包裹周围或部分套包虫.. 1传动装置,其中每个元素部分,周边有其他的,当然是双包络环面蜗杆传动。重要两者的区别是,区域联系存在着牙齿的二次包络齿轮,而只有线接触者之间的单包络齿轮。这次的蠕虫和蜗轮的一套具有相同的手螺旋至于越过螺旋齿轮,但螺旋角度通常都不尽相同。螺旋角对蠕虫一般都相当大,这对齿轮非常小。正因为如此,它通常指定牵头角度对蠕虫,它是相辅相成的蠕虫螺旋角,螺旋角对齿轮;两个角度来看都是平等的,为90摄氏度。轴角。
2023-07-11 03:52:102

专业英语高手进!!

2023-07-11 03:52:196

跪求翻译 急!!

舵机包括住房,蠕虫,球螺母,1架作出的活塞,液压助力器的组成,以及齿部门与连杆臂组成shaft.the权力一些车转向系统是一个油冷却器提供。 该舵机球螺母硬性担保机架内的活塞。在牙齿上的齿厚机架和部门可以调整在侧驱动涵盖了房屋的调节螺丝。减少之间的蠕虫和螺母摩擦,球在他们重新分发线程。机架,活塞铸铁弹性分裂环确保在舵机房的紧密配合。 督导轴旋转转换成机架活塞由于prpgressive议案,沿该蠕虫螺母位移。机架活塞牙齿把部门,因此与连杆臂轴。控制阀是安排之前,舵机住房。 此次与水库和过滤〖GB/T7586-1996〗液压助力双作用叶片pumo是安装在发动机上。它的动力是一个V带从曲轴普利或齿轮火车。该泵是连接到控制阀由两个软管:软管的压力,通过该液压油是从punp和返回液压流体水库返回软管交付。 督导机制包括方向盘。一转向轴。 asteeing列,带侧转向齿轮箱,降低盖,一弧面蜗杆,一个有三重滚子轴承和连杆的调整螺丝连杆轴轴。 过弯的努力申请到舵机应转交到前轮。这是由在转向连杆臂组成的联系。一个拉杆。,扎答阑链接,转向臂和左,rigt关节武器。督导联系是如此designde以防止副作用,在所有的汽车车轮comering船舶,从而enuring转向轮胎磨损和minimizinggwear缓解。为此,有必要将所有的车轮的几何轴线在一个点是由车轮描述共同的中心相交的圆圈 给分!
2023-07-11 03:52:332

求 外文翻译 是汽车专业的就行,两百分,在线等

汽车的倒没有关于道路之类的倒是有几篇 英文文献 不知道要不?要的话邮箱写个
2023-07-11 03:52:444

跪求中文摘要翻译

The 21st century"s manufacturing industry faces the customer demand actuation, not to be possible to forecast that fast changeable and the market competition which increases unceasingly from the whole world, moreover competes intensifies unceasingly. The market changes the request manufacture system processing the product variety to be able unceasingly the fast transformation to satisfy the market demand. The jig held the important position more and more in the machine manufacture, this article introduced one kind of stainless steel steel pot welding fixture"s design calculation. This jig uses the motor-driven, with the shaft coupling connection reduction gear, the reduction gear uses the single stage worm bearing adjuster to decelerate, after the reduction gear outputs the power, the reduction gear and the guide screw connection, by passes through the guide screw movement to carry on the processing to the work piece. This article carries on the design calculation in view of the mechanical drive part. First carries on the stress analysis to the job, thus calculates other part"s stress size; The next guide screw from its stability, the guide screw anti-shearing strength and the anti-bending strength carries on the computation; The worm bearing adjuster easy to present the surface pitting regarding the worm gear worm bearing adjuster in the transmission, the gear teeth breaks off, tooth face attrition and agglutination and so on, therefore time computation gathers according to the tooth root bending strength. To the tooth root worm gear main failure mode is the attrition, therefore in the computation according to the tooth face contact strength calculation, the countershaft class components" stress size carries on the crooked resultant stress and the fatigue strength finally gathers. Through promoted equipment"s overall performance to mechanical part"s design, the equipment to display the extremely good running ability.
2023-07-11 03:53:022

Service Temporarily Unavailable的503错误是怎么回事

先简单说一下 很多时候是由于网站空间服务器的配置或者资源限制导致的不足以承受运行的情况有些是买的时候 不知道有所限制 而不能满足程序的运营需求最好是联系服务商查阅相关日志 对症下药 如果撑不住最好换机器-----------------------------------------出现这种情况是由于您的网站超过了系统资源限制(CPU或者IIS)造成的,这个现象在WINDOWS2003+IIS6的环境下都会出现,主要是程序占用资源太多。不同的程序占用的资源都不一样,这个跟程序设计的合理性和优化程度有关;另外,一些死循环程序,或者不优化的程序都会占用太多的系统资源,而系统资源明显是有限的。 如果一个网站的程序占资源太多或者发生太多的错误,系统日志就会提示:“应用程序池 "User_pooll" 被自动禁用,原因是为此应用程序池提供服务的进程中出现一系列错误, 或者提示:应用程序池 "User_pooll" 超过了其作业限制设置。这时,访问这个网站就会提示:Service Unavailable。一般系统会在30秒左右恢复正常,多刷新几次就能正常访问了。但是这个时间恢复后因为访问量太大在极短的时间网站又不能上了。 另外,如果网站当前访问人数过多,超过了系统的iis连接数(或CPU峰值)限制,也会出现Service Unavailable的提示(win2k主机下出现连接过多就会提示:连接过多,请稍后再试;而win2003的主机刚直接提示:Service Unavailable)如果经常出现类似的错误,请及时优化网站程序,或者升级你的主机至更高的款型,以获得更多的系统资源。 网站超CPU的四种可能原因: 一.网站攻击 二.程序设计不合理,资源占用高,或本身在做占资源的操作,如采集 三.访问量过大四.有搜索蜘蛛收录程序占用资源太多的原因: 有一个或多个ACCESS数据库在多次读写过程中损坏,微软的MDAC系统在写入这个损坏的ACCESS文件时,ASP线程处于BLOCK状态,结果其他线程只能等待,IIS被死锁了,全部的CPU时间都消耗在DLLHOST(ASP进程)中。 参考解决办法: 压缩和修复我的数据库 下载数据库文件--[如果是.asp的扩展名,请改为.mdb的扩展名]--用ACCESS打开--选择工具--数据库实用工具--压缩和修复数据库--[改回.asp的扩展名]--上传覆盖原来数据库文件注册了不良的Com组件,特别是用VB开发的ACTIVE X控件,可能导致占用内存使用量不断增长 参考解决办法:尽量减少或避免非官方或是客户要求的不必要的组件多媒体等文件下载占用服务器带宽 参考解决办法:停止下载程序问题 需要及时的关闭不再使用的数据库,以避免一直占用服务器资源 在conn.asp 连接数据库字符串语句中加入如下 sub endConnection() conn.close set conn=nothing end sub 其它程序问题:把IE选项里 显示友好HTTP错误信息 的勾取消掉,再访问网站看出现什么错误信息,然后再调试上传重要的数据库等文件更新,由于正处于受访问状态,可能导致瞬间占用率上升 一般此情况较少,若有出现此情况时,可能有必要先暂停站点,再作更新ACCESS论坛(如动W)大了以后就很容易出现数据库方面的问题,当你的论坛数据库在30M以上,帖子5万左右,可能就会出现数据库吃不消的情况建议取消程序中使用的on error resume next这个容错语句,对错误进行调试。 临时解决办法:定期删除多余的数据、压缩数据库,限制论坛灌水,甚至限制论坛注册。如果是ASP论坛,可以使用分表储存功能,会有较好的效果 比较长远办法:更换论坛和数据库,一般都采用商业版本+MSSQL 的方案来解决
2023-07-11 03:53:121

apache 用哪个版本

您可以看一下这篇文章,希望能帮到你:http://jingyan.baidu.com/article/5bbb5a1bf4ad5d13eaa1796e.html
2023-07-11 03:53:153

起凡孔明灯快捷键是Ctrl+W,怎么变成Ctrl+G?

你好!起凡游戏里快捷键修改找到ctrl+W的把他改成ctrl+G如有疑问,请追问。
2023-07-11 03:53:194

急!!电脑用电脑浏览器打开淘宝显示503 Service Temporarily Unavailable

我刚刚也这样啊 我也是一分钟钱这样的 跪求回复
2023-07-11 03:53:214

I和me有什么区别,什么时候用,怎么用

I 是主语 (基本用语动词前面)i am studying for a quiz.i can speak English.me是宾语 (基本用语动词后面)My mom bought me a new phone. She asked me to show her my project.
2023-07-11 03:53:223

七牛云网站引用外链,访问出现ERR_SSL_VERSION_OR_CIPHER_MISMATCH报错是为什么?怎么解决啊?

请问这个问题解决了吗,怎么处理的呢
2023-07-11 03:53:232

我想取消ctrl+w这个快捷键,我快郁闷死了!

游戏中还是什么,你也得说清楚啊?不明不白的·
2023-07-11 03:53:056

js获取父级元素

给你的div一个ID,假定是div1吧document.getElementById("div1").parentElement.id
2023-07-11 03:53:053

七牛云存储测试域名显示cname解析正确,但是还是等待cname,怎么解决?

不要着急!如果七牛云测试域名显示检测cname已经正确,但是还是等待cname的这个情况,是可以解决的!因为控制台默认使用114dns服务器进行cname记录检测,当dns服务器存在波动或者新增/变更解析有延迟的情况下会提示等待cname,不影响访问的情况下可以忽略该报错,无视就行,重新访问。
2023-07-11 03:53:041

matlab中plot(a,Q,’*k’)是什么意思?

matlab中plot(a,Q,"*k")是什么意思?这句代码的意思是:函数图形用黑色颜色和“*”符号来表示a和Q的函数曲线关系。这里,plot是绘图函数,a和Q是一组数据,k是黑色颜色的代号,“*”在图形中表示a和Q的对应值。
2023-07-11 03:53:021

Ecexl 工作过程中 无意间按了CTRL+W 怎么恢复 急 答案好另加分

CREL+W是用来关闭窗口的,保存的可以恢复,其他的不太清楚了,应该很难恢复了吧!还是经常保存比较安全!
2023-07-11 03:52:574

怎么把七牛云存储空间的所有图片备份到

按照以下步骤: 1,这里当前最新的 iOS7 为例,打开 iPhone 主屏上的“照片”应用,打开照片以后,点击右下角的“相薄”选项。 2,随后在相薄中找到并点击“我的相片流”,这个即是 iCloud 中储存的照片了,这样就可以看到 iCloud 中储存的所有照片了。如图所示:
2023-07-11 03:52:561