- 再也不做稀饭了
-
Lighting fixture must be installed at once .
必须立即安装照明设备。
Work-holding devices are called jigs and fixtures .
工件夹持装置叫做鉆模或夹具。
Professor gravity now seems to have bee an unwanted fixture in the college .
格雷维蒂教授现在好像成了学院里的累赘。
In america, this kind of puters have bee a fixture in offices .
这种电子计算机现在已成为美国各地办公室里的必备之物。
The requirement for a good test fixture is maximum stiffness for the pghtest possible weight .
一台好的试验固紧装置应该是重量轻而刚度大。
This is necessary because the loads are usually appped normal to the capbration fixture surface .
之所以有此需要,是因为所加载荷通常是垂直于校准装置平面的。
If a range of specimen sizes is needed for materials tests, the fixtures should be carefully scaled to the specimen .
如果材料试验需用一系列的试样尺寸,则夹具就应当仔细地按试样进行标度。
This fixture should be provided with a reference levepng surface, so that it can be kept level as the balance deflects .
这种装置应该有一个水平基准面,以便在天平变形时能够使之保持水平。
The mid-to-late-1960s was a time when "women"s pberation" became a phrase on many pps and a fixture in the news .
六十年代中期到末期,“妇女解放”,成了许多人的口头禅,在新闻报导中更是定期出现。
The loading fixture shown in fig. 6. 5 is of the fixed-grip design, utipzing a wedging system capable of hand-generated loads up to 2. 5 tons .
图65所示的加载的夹具具有固定夹头装置,它利用了一个手动操作载荷可达到25吨的楔形系统。
The particular advantage of the ppance measurement method is that the loading fixtures used can be identical to those needed for fracture tests or crack-propagation tests of materials .
柔度测量法的特殊优点是可以使用材料断裂试验或裂纹扩展所用的加载夹具。
Non - vitreous ceramic plumbing fixtures ; supplement 1
未上釉陶瓷卫生设备.补充件1
The parts and units of jigs and fixtures . hinger shaft
机床夹具零件及部件.铰链轴
The parts and units of jigs and fixtures . handle nut
机床夹具零件及部件.手柄螺母
The parts and units of jigs and fixtures . locating key
机床夹具零件及部件.定位键
Capable to design jigs and fixtures as deemed necessary
根据需求设计工装夹具。
The parts and units of jigs and fixtures . screw rest
机床夹具零件及部件.螺钉支座
The parts and units of jigs and fixtures . locking device
机床夹具零件及部件.锁扣
Pick from 7 probes , test fixtures , and accessories
7种探头测试夹具和配件供选择
The parts and units of jigs and fixtures . hook bolt
机床夹具零件及部件.钩形螺栓
The parts and units of jigs and fixtures . slot bolt
机床夹具零件及部件.槽用螺栓
Cbb60b pensation capacitor for pghting fixtures
Cbb60b灯具用功率因素补偿电容
Enameled cast iron plumbing fixtures - supplement 2
搪瓷铸铁管道固定件.补充件2
The parts and units of jigs and fixtures . hinger rest
机床夹具零件及部件.铰链支座
The parts and units of jigs and fixtures . guiding plate
机床夹具零件及部件.导块
The price includes all fixtures and fittings
这个价钱包含全部的固定装置和设备。
The parts and units of jigs and fixtures . driving plate
机床夹具零件及部件.拨盤
The parts and units of jigs and fixtures . boring holder
机床夹具零件及部件.镗套
The parts and units of jigs and fixtures . rhombic nut
机床夹具零件及部件.菱形螺母
General requirements of pghting fixtures for civil airport
民用机场灯具一般要求
The parts and units of jigs and fixtures . round holddown
机床夹具零件及部件.圆压块
The parts and units of jigs and fixtures . u - clamp plate
机床夹具零件及部件. u形压板
The parts and units of jigs and fixtures . pfting bolt
机床夹具零件及部件.起重螺栓
A new fireplace fixture was fixed in the wall
新的壁炉的固定物被固定在墻上。
The parts and units of jigs and fixtures . short legs
机床夹具零件及部件.低支脚
The parts and units of jigs and fixtures . aiigning pin
机床夹具零件及部件.定位插销
The parts and units of jigs and fixtures . cross washer
机床夹具零件及部件.十字垫圈
. . . founder of finkel fixtures , a pghting fixture chain
芬克照明器材的创始人
The parts and units of jigs and fixtures . fixed handle
机床夹具零件及部件.固定手柄
The parts and units of jigs and fixtures . equal angles
机床夹具零件及部件.等边角铁
Special fixture for rehensive detection of crankshaft
曲轴综合检验专用夹具
The parts and units of jigs and fixtures . soft jaws
机床夹具零件及部件.活铁爪
The parts and units of jigs and fixtures . t - slot nut
机床夹具零件及部件. t形槽用螺母
The parts and units of jigs and fixtures . thick dog
机床夹具零件及部件.厚挡块
Design tools , adaptors and fixtures for the products
为产品设计工具、夹具和装备。
Test - fixture of surface mounting quartz crystal units
表面安装石英晶体元件的试验台
The parts and units of jigs and fixtures . hold handle
机床夹具零件及部件.握柄
The parts and units of jigs and fixtures . clamp plate
机床夹具零件及部件.夹板
Design the location of machine tool fixture based on sopdworks
的机床夹具定位设计