伺服驱动器输入电源是否可接单相220V

PC：比例控制；
TL：外部转矩限制选择
CR：清除
CM1：电子齿轮选择1
TL1：内部转矩限制选择1
http://wenku.baidu.com/link?url=LpfMuiir9HBUc5bKIIFUuNwq1Z0Z0bIG0tly7thnVz8bCJmWK-eWmiGRSo3ZhI4EliRicfr-XE5k5dS11L3QjaJazkbOjscHojErbMFoRL_
这上面有说明的,可以自己看一下的.

1 切断交流电源后,伺服驱动器充电指示灯未熄灭前,表示伺服系统内部仍有高压,十分危险,请勿触摸内部电路及零部件.
2 机台接地端请务必正确接地.
3 严禁私自改装,更换控制板及零部件,否则有触电,机台错误动作等危险
4 请勿对机台内部的零部件进行耐压测试、机械零件用力敲打等,造成零件受损.
5 * 押出机主机电源线用3相380V,50平方以上的主电源线,须接地线
** 搅拌马达电源线接至电箱内,须接地线
*** 水槽下鼓风机马达电源线接至电箱内,须接地线
**** 接切粒机主电源线3相380V,须接地线
6 将变频器马达接线U.V.W任意两相调换即可
1 AC power supply cut off,the servo drive is not put out before the charging indicator light,said high-pressure servo-system is still very dangerous,do not touch the internal circuits and components.
2 client machine grounding grounding be sure to correct.
3,no unauthorized alterations,replacement panels and parts,or electric shock,machine moves,such as the risk of error
4 Do not machine parts and components for internal pressure testing,mechanical parts such as hard hit,resulting in damaged parts.
5 * Extruder mainframe power cord with 3-phase 380V,50 more than the square of the main power line,ground line shall be
** Stirring motor to electric power line access box shall be grounded line
*** Blower motor under the sink then the power cord to power the box,be grounded line
**** Then the main power line granulator 3 phase 380V,line to be grounded

6 Inverter UVW motor wiring can swap any two-phase